HP MSR1002-4 Configuration Manual page 211

Item
IP multicast routing
IGMP
PIM
Figure 71 Network diagram
S 2
VPN b
GE1/0/1
CE b1
R 1
S 1
CE a1
GE1/0/1
VPN a
Table 18 Interface and IP address assignment
Device Interface
S 1 —
S 2 —
Network requirements
•
Enable IP multicast routing on the P router.
•
Enable IP multicast routing on the public network instance on PE 1,
PE 2, and PE 3.
•
Enable IP multicast routing for VPN instance a on PE 1, PE 2, and PE
3.
•
Enable IP multicast routing for VPN instance b on PE 2 and PE 3.
•
Enable IP multicast routing on CE a1, CE a2, CE a3, CE b1, and CE
b2.
•
Enable IGMPv2 on GigabitEthernet 1/0/2 of PE 1.
•
Enable IGMPv2 on GigabitEthernet 1/0/1 of CE a2, CE a3, and CE b2.
Enable PIM-SM on the public network and for VPN instances a and b:
•
Enable PIM-SM on all interfaces of the P router.
•
Enable PIM-SM on all public and private network interfaces on PE 1,
PE 2, and PE 3.
•
Enable PIM-SM on all interfaces that do not have attached receiver
hosts on CE a1, CE a2, CE a3, CE b1, and CE b2.
•
Configure Loopback 1 of P as a public network C-BSR and C-RP to
provide services for all multicast groups.
•
Configure Loopback 1 of CE a2 as a C-BSR and a C-RP for VPN
instance a to provide services for all multicast groups.
•
Configure Loopback 2 of PE 3 as a C-BSR and a C-RP for VPN
instance b to provide services for all multicast groups.
R 2
Loop1
Loop1
PE 2
GE1/0/3
P
PE 1
Public
Loop1
IP address
10.110.7.2/24
10.110.8.2/24
202
VPN a
Loop1
CE a2
Loop1
GE1/0/1
PE 3
Loop2
CE b2
Device Interface
PE 3 GE1/0/1
PE 3 GE1/0/2
VPN a
R 3
GE1/0/1
CE a3
GE1/0/1
R 4
VPN b
IP address
192.168.8.1/24
10.110.5.1/24