Removing The Broil Element - LG LSE4613ST Service Manual

REMOVING THE BROIL ELEMENT

REMOVING THE BROIL ELEMENT
WARNING
!
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
!
• Be careful when you work on the
electric range handling the sheet
metal part.
- Sharp edge may be present and you can cut
yourself.
BROIL ELEMENT (SHEATH HEATER)
1. Turn off the electrical supply going to the range.
2. Open the oven door and remove the racks from
inside the oven.
3. To remove the outer broil element:
a) Unplug 2 receptacle at each point.
COMPONENT ACCESS
b) Remove the 4 screws from the front and rear
brackets.
3-10
Screws
4