HP 830 Series Configuration Manual page 21

Step
3. Enter user interface view.
4. Enable the scheme
authentication mode.
5. Configure the user privilege
level.
To configure the user privilege level directly on a user interface that uses the none or password
authentication mode:
Step
1. Enter system view.
2. Enter user interface view.
3. Configure the authentication
mode for any user who uses
the current user interface to
log in to the device.
4. Configure the privilege level
of users logged in through the
current user interface.
For example:
# Display the commands a Telnet user can use by default after login.
<Sysname> ?
User view commands:
display Display current system information
ping Ping function
quit Exit from current command view
ssh2 Establish a secure shell client connection
super Set the current user priority level
telnet Establish one TELNET connection
tracert Trace route function
# Configure the device to perform no authentication for Telnet users, and to authorize authenticated
Telnet users to use level-0 and level- 1 commands.
Command
user-interface { first-num1
[ last-num1 ] | vty first-num2
[ last-num2 ] }
authentication-mode scheme
user privilege level level
Command
system-view
user-interface { first-num1
[ last-num1 ] | { aux | console |
vty } first-num2 [ last-num2 ] }
authentication-mode { none |
password }
user privilege level level
15
Remarks
N/A
Optional.
By default, the authentication
mode for VTY and AUX users is
password, and no authentication is
required for console users.
The default user privilege level is 3
for console users and 0 for other
users.
Remarks
N/A
N/A
Optional.
By default, the authentication
mode for VTY and AUX user
interfaces is password, and no
authentication is required for
console login users.
Use no authentication mode only in
a secure network environment.
Optional.
The default user privilege level is 3
for console users and 0 for other
users.