Https Login Configuration Example - HP 830 Series Configuration Manual

Figure 16 Web login page
# Type the user name, password, and verify code. Then, click Login. The homepage appears.
After login, you can configure the AC settings through the Web interface.

HTTPS login configuration example

Network requirements
As shown in
the AC as the HTTPS server and the host as the HTTPS client, and request a certificate for each of them.
Figure 17 Network diagram
10.1.1.1/24
10.1.1.2/24
Host
Configuration procedure
In this example, the CA is named new-ca, runs Windows Server and is installed with the SCEP add-on.
The AC, host, and CA can reach each other.
1. Configure the AC (the HTTPS server):
# Configure a PKI entity, and set the common name to http-server1 and the FQDN to
ssl.security.com.
<AC> system-view
[AC] pki entity en
[AC-pki-entity-en] common-name http-server1
[AC-pki-entity-en] fqdn ssl.security.com
[AC-pki-entity-en] quit
# Create a PKI domain, specify the trusted CA as new-ca, the URL of the server for certificate
request as http://10.1.2.2/certsrv/mscep/mscep.dll, authority for certificate request as RA, and
the entity for certificate request as en.
[AC] pki domain 1
Figure 17, to prevent unauthorized users from accessing the AC's Web interface, configure
AC
10.1.2.1/24
10.1.2.2/24
CA
47