Diagnostic Trouble Code (Dtc) Check (Using Abs Warning Lamp) - Suzuki GRAND VITARA XL-7 Owner's Manual

Hide thumbs Also See for GRAND VITARA XL-7:
Table of Contents

Advertisement

5E2-10 ANTILOCK BRAKE SYSTEM (ABS)
Example : When right-front wheel speed sensor circuit opens (DTC 21)
Diagnostic Trouble Code (DTC) Check (Using
ABS Warning Lamp)
1) Perform ABS WARNING LAMP CHECK described above.
2) Using service wire (4), connect diagnosis switch terminal (2)
of monitor coupler (1) to ground (3).
3) Turn ignition switch ON.
4) Read flashing of ABS warning lamp which represents DTC
as shown in example below and write it down. When more
than 2 DTCs are stored in memory, flashing for each DTC is
repeated three times starting with the smallest DTC number
in increasing order.
For details of DTC, refer to "DTC TABLE".
5) After completing the check, turn ignition switch off, discon-
nect service wire from monitor coupler.

Advertisement

Table of Contents
loading

Table of Contents