Brother WD-200 SERIES User Manual page 11

a Power button
Press this button to turn the AiRScouter on. Press and
hold this button for two seconds to turn the AiRScouter
off.
The power automatically turns OFF if there is no input
from a video source for one minute or more.
b Mode button
Press this button to select the zoom mode. For more
information, see page 20.
c Rotate button
Press this button to rotate the image by 180°. Press and
hold it for two seconds to flip the image horizontally.
d Brightness button
Press this button to select one of five brightness levels.
 Control Panel Status LEDs
a
a Display LED (green)
Lights while the AiRScouter is on and an image is being
projected on the display.
b Key Lock LED (orange)
Lights when button operation on the control box is
locked. For more information, see page 19.
c Internal battery LED (orange)
Lights during battery charging.
d External power LED (orange)
Lights when power is supplied from the AC adapter, or
from an external battery (third-party USB battery).
d c
b
11