Use External Batteries - Brother WD-200 SERIES User Manual

Use external batteries

You can use a third-party USB battery as an external battery.
If the capacity of the internal battery is too low, use an external
battery that allows for a longer operation of the AiRScouter.
[Important]


1
Before connecting the external battery to the control box,
fully charge the battery.
For more information about charging
your external battery, see its manual.
2
Connect the connector of the USB cable to the USB
micro-B port of the control box.
3
Connect one connector of the USB cable to the port of
the USB battery.
Only use a third-party battery that supplies
the voltage of DC 5 V and the current of at
least 1 A.
The external battery cannot be used to charge
the internal battery.
31