Display; Turn The Power On; Adjust The Head Display To Suit The Application - Brother WD-200 SERIES User Manual

3. Display

Turn the power on

Press the power button to
turn the AiRScouter on (the
LED below the power
button lights in green).
Adjust the head display to suit the
application
Adjust the flexible arm to put
the head display in a
position that is easy to view.
[Note] If the Ball Joint becomes loose after repeated

adjustments of the head display position, turn
the dial of the flexible arm to tighten it.
If it is not possible to bring the image into the

field of view just by adjusting the flexible arm,
adjust the position of the head band.
17