Clean The Head Band; Clean The Control Box - Brother WD-200 SERIES User Manual

[Note]

Clean the head band

If the pads attached to the head band are dirty, wipe them
with a dry cloth.
If you cannot remove dirt from the pads using a dry cloth,
clean them with ethanol.

Clean the control box

Wipe dust and dirt off the control box with a soft, dry cloth.
If you cannot remove dust and dirt off the pads using a
dry cloth, wipe it with a moistened and well wrung cloth.
34
The mirror unit

consists of a mirror
(with reflective and
non-reflective
sides) and a lens
cover.
Always wipe the

reflective side
gently because
strong rubbing may
cause it to peel off.
Lens cover
(non-reflective side)
Mirror
(reflective side)
Mirror