Advertisement
ENGLISH
30
Problem
The shaver is
not entirely
clean after I
clean it in the
SmartClean
system.
Possible cause
The rechargeable
battery is empty.
The travel lock
is activated.
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
You have not
placed the shaver in
the SmartClean
system properly, so
there is no electrical
connection between
the SmartClean
system and the
shaver.
The cleaning
cartridge is empty.
The replacement
symbol flashes to
indicate you have to
replace the cleaning
cartridge.
You have used
another cleaning
fluid than the original
Philips cleaning
cartridge.
Solution
Recharge the battery
(see chapter 'Charging').
Press the on/off button
for 3 seconds to deactivate
the travel lock.
Clean the shaving heads or
replace them (see chapters
'Cleaning and maintenance'
and 'Replacement').
Press down the top cap
('click') to ensure a proper
connection between the
shaver and the SmartClean
system.
Place a new cleaning
cartridge in the SmartClean
system (see chapter
'Cleaning and maintenance').
Only use the original
Philips cleaning cartridges.
Advertisement
