Advertisement
Problem
Water is leaking
from the
bottom of the
shaver.
The SmartClean
system does not
work when I
press the on/off
button.
The shaver
is not fully
charged after I
charge it in the
SmartClean
system.
I replaced
the shaving
heads, but the
replacement
reminder symbol
is still showing.
A shaving
head symbol
is suddenly
showing on the
display.
Possible cause
During cleaning,
water may collect
between the inner
body and the outer
shell of the shaver.
The SmartClean
system is not
connected to the
mains.
You have not placed
the shaver in the
SmartClean system
properly.
You have not reset
the shaver.
This symbol is
a replacement
reminder.
ENGLISH
Solution
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the shaver.
Put the small plug in
SmartClean system and
put the adapter in the wall
socket.
Make sure you press the
shaver in the SmartClean
system until it locks into
place.
Reset the shaver by pressing
the on/off button for approx.
7 seconds (see chapter
'Replacement').
Replace the shaving heads
(see chapter 'Replacement').
31
Advertisement
