4. If you are replacing a storage drive with a converter, flex the sides of the bracket to remove the converter
from the bracket.
Figure 79. Removing the converter from the type
Remove the storage drive from the converter. See Figure 71 "Removing the metal bracket from the
plastic frame of the converter" on page 96.
5. Install the new storage drive into the converter. See Figure 73 "Installing the storage drive into the metal
bracket of the converter" on page 97.
6. Flex the sides of the bracket and align pins
converter.
Note: Ensure that the circuit board face upward and the connectors
bracket.
Figure 80. Installing the converter into the type
100
ThinkStation P510 and P710 User Guide
2
bracket
1
on the bracket with the corresponding holes in the
2
bracket
2
face toward the rear of the