Lenovo ThinkStation P710 User Manual page 99

5. Slide the bracket with the new storage drive into the storage drive bay.
Figure 54. Installing the type
6. Connect the signal cable and the power cable to the new storage drive, and then close the handles
on both sides of the bracket.
To install or replace a 3.5-inch storage drive in a type
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 61.
2. Locate the storage drive bay. See "Internal drives" on page 10.
3. Press the pit on the bracket cover, and then grasp the tilted cover to pull the bracket out of the storage
drive bay.
Figure 55. Removing the type
1
storage drive bracket
2
2
storage drive bracket
bracket, do the following:
.
Chapter 7 Installing or replacing hardware
87