Siemens S120 Manual page 110

Power Modules
4.2 Blocksize Power Modules (PM240-2)
Line voltage 1-phase/3-phase 200 ... 240 VAC ± 10%
Order number
without integrated line filter
with integrated line filter
PE connection
Max. motor cable length
shielded/unshielded
Degree of protection
Weight
Without line filter
With line filter
Rated output of a typical standard induction motor at 230 V.
1)
The input current depends on the motor load and line impedance. The input currents apply for a load with the type rating
2)
(based on I ) for a line impedance corresponding to u
rated
Max. motor cable length 50 m (shielded) for PM240-2 Power Modules with integrated line filter to maintain the limit
3)
values of EN 61800-3 Category C2.
Power loss in the cabinet: 0,075 kW. The remaining power loss is dissipated via the heat sink.
4)
110
6SL3210–
1PB21-4UL0
1PB21-4AL0
On line connector
3)
m 50 / 100
IP20
kg 5,0
kg 5,2
Internal Push-through
6SL3210– 6SL3211–
1PB21-8UL0 1PB21-8UL0
1PB21-8AL0 1PB21-8AL0
IP54
5,0 5,8
5,2 6,3
= 1%.
k
3-phase 200 ... 240 VAC
±10%
Internal
6SL3210–
1PC22-2UL0
1PC22-2AL0
IP20
5,0
5,2
Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4
6SL3210–
1PC22-8UL0
1PC22-8AL0
5,0
5,2
AC Drive