Key Setting Operations With The Key Control Block; Operations In The Key Control Block - Sony DVS-9000 System User Manual

Key Setting Operations With the Key
Control Block
This section describes the basic procedures for key settings using the key
control block.
Key type selection buttons
Key fill/key source selection buttons

Operations in the Key Control Block

Parameter adjustment with the knobs
When the button for a function requiring parameter settings is pressed (that is,
on), you can set the parameters with the four knobs. If there are more than four
values to be assigned to the knobs, the [MORE] button lights amber. At this
point, press the [MORE] button, which turns green, to assign the fifth and
subsequent parameters to the knobs, so that the parameter settings can be made.
Key delegation buttons
M/E delegation buttons
M/E M/E M/E RE
P/P
1 2 3 SIZER
DME
KEY1 KEY2 KEY3 KEY4 TRANS
LUM LIN CRK CVK PTN
DME
AUTO MATTE KEY SOFT
SPLIT
SEL FILL DROP EDGE
DROP OUT
BDR SHDW EMBOS
BDR LINE
SHOW MAIN SUB OVER
ZABTN MORE
RIDE
KEY MASK MASK
Edge type selection buttons
MORE button
Key control block
Displays
Knobs
DME DME DME
1 2 3 4
DME DME DME
5 6 7 8
FM
MON
FEED
PROC AUTO
TRACE
KEY DELEG

Key Setting Operations With the Key Control Block

185