Sony DVS-9000 System User Manual page 300

automatically sets the playback start point. (The duration setting is not
displayed in the device control block.)
To specify the playback stop point
Start playback, and at the desired position press the [STOP] button to stop
playback, then press the [STOP TC] button. To set to any position, press the
[SET STOP TC] button, and enter a timecode from the numeric keypad control
block.
To carry out the variable speed playback
Use the search dial.
For details on using the search dial, see "Controlling the Tape/Disk
Transport" in Chapter 12 (Volume 2).
To apply a loop to a frame memory clip
Press the [LOOP] button.
Using the device control block (MKS-8031TB trackball module,
option) to play back clips
Note
A frame memory clip must first be recalled with a menu operation.
1
2
For details of the buttons in the device control block (MKS-8031TB trackball
module, option), see "Device Control Block (MKS-8031TB Trackball Module,
Option)" (page 69) in Chapter 2.
For details of the playback start point, stop point, and duration settings, see the
previous item, "Using the device control block (MKS-8036A Search Dial
Module, option) to play back clips" (page 299).
To carry out the variable speed playback
Press any of the [SHTL], [JOG], and [VAR] buttons, then turn the Z-ring or
move the joystick. The image changes in the forward direction when you turn
the Z-ring clockwise, and in the reverse direction when you turn it
300
Frame Memory Clip Operations
Press the [DEV] button in the region selection buttons, and select the frame
memory clip for playback (FM1 CLIP to FM8 CLIP).
If the pair mode is on, both main and subsidiary FMs light.
Press the [PLAY] button, turning it on.
To stop playback, press [STOP] or any of the [SHTL], [JOG], [CUE],
[REW], [FF], and [ALL STOP] buttons.