Kenwood DDX3021 Service Manual page 15

3.1.4 Removing the DVD mechanism (See Fig.7 to 13)
(1) Remove the 3 screws E and 2 screws F attaching the Heat
sink.
E
F
(2) Remove the 2 screws G and 2 screws H attaching the Rear
heat sink
G
(3) Disconnect the FFC wire connected to connector
the Main unit. (See Fig.9)
Fig.7
H
Fig.8
CN105
CN105
Fig.9
(No.WA022<Rev.001>)15/36
(4) Remove the 2 screws J attaching the Top chassis. (See
Fig.10)
(5) Remove the 1 screw K attaching the Top chassis. (See
Fig.11)
of
(6) Remove the 4 screws L attaching the Top chassis. (See
Fig.12)
J
Fig.10
K
Fig.11
L
Fig.12