Hitachi Compute Blade 2500 Getting Started Manual page 112

DCMI (Data Center Management Interface)
Power consumption
External dimensions (width x depth x height)
Weight
Note:
1
Hard disk drive capacity is calculated assuming that 1 GB is equal to 10
.
2 The mezzanine card slot 1 and slot 3 are used exclusively with an onboard LAN.
.
3 In SMP configuration between blades, VGA and COM are not available and only USB
.
port is available on non-primary server blades.
4 The Weight of a server blade includes that of SMP connection board.
.
Supported CPUs
Number of cores
CPU frequency
QPI frequency
L3 Cache
TDP
Number of CPUs
Main Memory
A-6
Items
KVM connector
Table A-6 CB 520X B3 - CPU specifications
Items
E7-8880 v4
22 C
2.2 GHz
9.6 GT/s
55 M
150 W
Maximum: 2
Table A-7 CB 520X B3 - blade specifications
Items
DIMM type (per slot)
Operating mode
Number of slots
Memory capacity
System Unit Specifications
Hitachi Compute Blade 2500 Series Getting Started Guide
Specifications
1 (VGA / COM / USB2.0 /
3
2port)
Supported
Maximum: 855 W(including
HDDs and mezzanine
cards)
435.3 mm x 492.7 mm x
55.5 mm (2S)
Maximum: 13.8kg
Specifications
E7-8890v4 E7-8893v4
24C 4C
2.2 GHz 3.2 GHz
9.6 GT/s 9.6 GT/s
60 M 60 M
165 W 140 W
Specifications
DDR4 RDIMM: 16 GB, 32
GB, 64 GB
Independent Mode
(Default), Lockstep Mode,
Rank Sparing Mode,
Mirrored Memory Mode
48
Maximum:
1,536 GB (32 GB x 48)
3,072 GB (64 GB x 48)
4
9
bytes.