Tip:
•
When you start the remote console, a confirmation dialog box regarding
the digital signature for Java might be displayed. This does not indicate a
problem.
•
If the server blade is powered on, the VGA window of the server blade is
displayed when you start the remote console.
•
If the server blade is powered off and no VGA signal is output, the remote
console displays "No Signal".
Related topics
•
Logging in to the management module on page 3-5
Starting the remote console from the Web console on a server blade
This section describes how to start the remote console by using a Web
console that is logged in to a server blade.
1
Start the web browser for the system console and enter the URL
.
"https://IP-address-of-server-blade/".
The Web console starts, and the login window to the server blade is
displayed.
2
In the Username field, enter "user01". In the Password field, enter
.
"pass01".
This user name and password combination is the initial setting (the
setting at shipping time). If you have modified the settings, enter the
modified user name and password as necessary.
3
Click OK to log in.
.
The Remote Console Launch window is displayed.
4
In the Remote Console Launch window, click Launch Remote
.
Console.
Related topics
•
Hitachi Compute Blade 2500 Series Management Module User Guide
manual
Remote console window
This section describes the remote console window and the information
displayed in the window.
5-6
Functionality and Operation of the Remote Console
Hitachi Compute Blade 2500 Series Getting Started Guide