Item
FD drive
4
OS
Notes:
1
When you operate server blades from a remote console, a maximum of 256 MB of memory installed
.
on the system console is used per server blade. To operate multiple server blades at the same time,
install a sufficient amount of memory on the system console computer.
2
Use a LAN cable of Category 5 or higher to connect the system console computer and the CB 2500
.
system unit.
3
If you want to run the remote console in an IPv6 environment, you must disable wireless network
.
connections on the system console and connect to the network over Ethernet. If wireless network
connections are enabled, you will not be connected to the IPv6 network environment even if you
connect to the network over Ethernet.
4
If the TLS 1.1 or TLS 1.2 protocol is used for communication between the remote console and the
.
system unit, use one of the following OSs: Windows 7 or later or Windows Server 2008 R2 or later.
1-10
Windows
•
A USB-connected CD drive or DVD drive
(We recommend devices conforming to
USB 2.0.)
You need one of the following types of FD
drive connected to the system console
computer.
•
An FD drive built in to the computer
•
A USB-connected FD drive
•
Windows Vista Business
•
Windows 7 Professional
•
Windows 8
•
Windows 8 Professional
•
Windows 8.1
•
Windows 8.1 Professional
•
Windows 10 Education
•
Windows 10 Enterprise
•
Windows 10 Pro
•
Windows Server 2008 Standard (32 bit)
•
Windows Server 2008 Enterprise (32 bit)
•
Windows Server 2008 R2 Standard
•
Windows Server 2008 R2 Datacenter
•
Windows Server 2008 R2 Enterprise
•
Windows Server 2012 Standard
•
Windows Server 2012 Datacenter
•
Windows Server 2012 R2 Standard
•
Windows Server 2012 R2 Datacenter
CB 2500 Overview
Hitachi Compute Blade 2500 Series Getting Started Guide
Specifications
Not supported
•
OS X 10.8 (Mountain Lion)
•
OS X 10.10 (Yosemite)
OS X