Troubleshooting - Sharp FP-F30A Operation Manual

TROUBLESHOOTING

Before calling for services, please review the list below, since the problem may not be a unit malfunction .
SYMPTOM
Dust and smoke are not removed.
A clicking or ticking sound is heard
from the unit.
The discharged air has an odor.
The Plasmacluster Ion Indicator
doesn't Light on.
OM_FP-F30A_EN.indd 10
REMEDY (not a malfunction)
• Clean or replace the filter if they appear to be heavily
soiled. (Refer to E-8,E-9 )
• Clicking or ticking sound may be audible when the unit
is generating ions.
• Check to see if the filter are heavily soiled.
Replace the filter.
• Plasmacluster Air Purifiers emit small traces of ozone
which may produce an odor. These ozone emissions
are well below safety levels.
• Check to see if the SLEEP mode is selected.
The Plasmacluster Ion Indicator Light is turned off
3 seconds after the SLEEP mode is selected.
• Check to see if the Plasmacluster Ion OFF is selected.
Press to light on.
• Check to see if the Light Control is selected.
Press for 3 seconds to light On.
E-10
2015/10/14 10:53:07