Sharp FP-F30A Operation Manual page 9

Light Control
You can set the Plasmacluster Ion Indicator to OFF when the Plasmacluster Ion Indicator is bright.
ON
more than
3 sec.
Plasmacluster Ion ON/OFF
When Plasmacluster Ion is ON, the Plasmacluster Ion Indicator Light will turn on. (blue)
ON
Auto RESTART
If the unit is unplugged or if there is a power failure, the unit will resume operation with the previous
settings after power is restored.
ON
(with the unit OFF)
If the ,
OM_FP-F30A_EN.indd 7
OFF
OFF
OFF
(with the unit OFF)
more 3 sec.
Lighting
, lamp Lights up for 10 seconds, the setting is completed.
NOTE
• When the unit starts operation, the
more than
Plasmacluster Ion Indicator always
3 sec.
lights.
• In SLEEP mode, Light Control
button doesn't operate.
NOTE
When Indicator is off,
• To turn OFF Plasmacluster Ion, the
indicator will flash for 3 seconds.
Flashing
• To turn ON Plasmacluster Ion, the
indicator will light up for 3 seconds.
Lighting
more 3 sec.
Flashing
E-7
OFF
3 sec.
OFF
3 sec.
2015/10/14 10:53:06