Mitsubishi Electric GOT2000 Series User Manual page 530

■1. Setting the password for the backup/restoration
The password for the backup/restoration can be set only when the following conditions are satisfied at the first backup.
• A password has been set to the backup target file of the controller.
The authentication using the password on the controller side is required at the first backup.
The following shows the operation procedure at the first backup.
For details of the operation screen, refer to the following.
➠
For other than FXCPU
Input the password on the controller side.
(For the second file or later, the automatic
authentication is conducted using the last input
password. Only when the automatic authentication
has failed, inputting the password is required.)
No
Yes
Yes
Yes
Set the password for the backup/restoration
using 32 characters or less
(alphanumeric characters and symbols only).
*1
15 - 56
15.8 Backup and Restoration
15.8.6 Display operation of backup and restoration
Start
Touch [Backup] in main menu.
(First backup)
*1
Is there any password set
for the file to be backed up?
Yes
Is the password correct?
Yes
File is backed up.
Is there any other file?
No
Is there any other units?
(When a multiple CPU system is used)
No
Is there any other controller
that is to be backed up?
(When a controller list file exists)
No
Backup is completed.
For the details, refer to the following.
➠
15.8.6 Display operation of backup and restoration
For FXCPU
No
If a keyword has been set, clear it.