Parameter Setting - Mitsubishi Electric GOT2000 Series User Manual

16.2.15 Parameter setting

Sets FX PLC parameters.
■1. Parameters that can be changed and change targets
(1) Parameters that can be changed
The parameters that can be changed with the MELSEC-FX list editor and the target FX PLCs are as follows.
Item
Memory space
setting
File register space
setting
Latch range setting
RUN terminal setting
Initialization of
parameters
*1
*2
(2) Change targets
When a memory cassette is mounted, the parameters in the memory cassette are targeted for changes.
■2. Operation
Stop the FX PLC
Stop the FX PLC
*1
16 - 34
16.2 FX List Editor (GT2105-Q, GT2104-R only)
FX0(S)
FX1
/FX0N
*1
*2
When connecting an FX0(S), set "0". Setting other than "0" causes a parameter error.
When the parameters are initialized, the display on the MELSEC-FX list editor is different from the FX PLC default values, but do
not change the latch range. Changing the latch range causes an error.
*1
OP [Parameter setting]
*1
Select [Parameter setting] with
OP
GO
When checking parameters (not changing), it is not necessary to stop the PLC.
: Can be set/changed
Target CPU
FX2(C) FX1S FX1N(C)
*2 *2
GO
or
: Cannot be set/changed
FX2N(C) FX3S
.
FX3G(C) FX3U(C)