Installation Of Bootos And Basic System Application; Bootos And Basic System Application To Be Installed; Application - Mitsubishi Electric GOT2000 Series User Manual

18. INSTALLATION OF BOOTOS AND BASIC SYSTEM APPLICATION

To execute the GOT utility, install the BootOS and system applications on the C drive (built-in flash memory) of the GOT, or
set the boot drive of the package data to [A:SD card] and insert an SD card with the package data into the GOT.
(BootOS is installed in the GOT at factory shipment. It is not necessary to install BootOS when upgrading of it is
unnecessary.)
This chapter explains the installation using GOT.
GT Designer3 → Data storage → GOT
GT Designer3
GOT → Data storage → GOT
GOT
*1 When execute installation with a USB memory, the system applications have to be installed in GOT in advance.
The GT2105-Q, GT2104-R, GT2104-P, and GT2103-P do not support the USB memory.
Refer to the following for the installation which uses GT Designer3.
➠ GT Designer3 (GOT2000) Help

18.1 BootOS and Basic System Application to be Installed

Under-mentioned BootOS and basic system application are necessary to execute utility.
System application name
BootOS
System application
Write
system

application

*1
Data storage
Write
SD card
system
application
Set the OS boot drive to
[A: 標準SDカード].
System
application
upload
*1
Data storage
Required for the control of GOT and the communication between PC and GOT.
Installed at factory shipment.
(BootOS can also be installed from GT Designer3. When BootOS is installed, the GOT is initialized
and goes to the status at factory shipment. When BootOS needs to be reinstalled, the basic system
application has to be installed in the GOT.)
Required for the GOT operation as the monitoring function of GOT, installation and deletion of the
system application or project data, touch key control or display function of the screen and guidance.
Required for display and operation of the user-created screen and utility screen.
Not installed in GOT at factory shipment.
Install it from GT Designer3 or an SD card.
18.1 BootOS and Basic System Application to be Installed
BootOS or system
application installation
GOT
Install the SD
card in GOT
GOT
Install the SD
card in GOT
BootOS or system
application installation
GOT
Install a data storage
in the GOT.
Function overview
When GOT is remote,
installed easily using
a data storage
The GOT can starts without a
system application installed.
Install from GOT to GOT
using a data storage.
18 - 1
18