Kenwood CK 304 G Instructions For Use Manual page 19

CORRECT REPLACEMENT OF THE AUXILIARY, SEMI-RAPID AND RAPID BURNERS
It is very important to check that the burner flame distributor F and the cap C has been
correctly positioned (see figs. 7.1 - 7.2) - failure to do so can cause serious problems.
CORRECT REPLACEMENT OF THE TRIPLE-RING BURNER
The triple ring burner must be correctly positioned (see fig. 7.3); the burner rib must be
enter in their logement as shown by the arrow.
The burners must be correctly positioned so that they cannot rotate (fig. 7.4).
Then position the cap A and the ring B (fig. 7.4 - 7.5).
Fig. 7.3
A
B
Fig. 7.4
Fig. 7.5
19