Kenwood CK 304 G Instructions For Use Manual page 36

REPLACEMENT OF THE GRILL BURNER INJECTOR
– Unscrew and remove the burner fixing screw 'C' (fig. 9.8).
– Slacken screw 'D' (fig. 9.8).
– Move and gently suspend the burner as shown in figure 9.9. Take care not to damage
the wire to the ignition electrode and the safety valve probe.
– Remove the injector from the connection and replace it with the correct one (fig. 9.9).
Fig. 9.9
C
D
Fig. 9.8
36