Table of Contents
Advertisement
Praesideo 3.5 | Installation and User Instructions | 3 | Control Equipment
5.5.2
Navigate through the menu
Operating the menu is always a sequence of alternating
turns and pushes:
Turn the button to:
•
Cycle through the menu items within a menu.
•
Go to a settable option within a menu item (a
blinking cursor moves through the menu screen).
•
Cycle through the available values for a settable
option (the value is blinking).
Push the button to:
•
Confirm a chosen menu item (a blinking cursor
appears).
•
Go to a submenu (the submenu item character starts
blinking).
•
Confirm the selection of a settable option (the cursor
disappears, the option value starts blinking).
•
Confirm a selected value for a settable option (the
value stops blinking, the cursor appears again).
Each menu is identified by a number or by a number
plus a character (see figure 5.13). The item identification
can be found at the start of the first line and is used to
navigate to and from the submenus. Most menu items
have one or more options. The value of an option can
be changed by selecting a value from a list of available
values.
main menu
item number
1 Monitoring
Input 1
option values
figure 5. 1 3: Menu item screen elements
Bosch Security Systems | 2011-02
main item
title
-10dB
To navigate through the status screens:
1 Turn the button to move through the status screens
(i.e. the Clock, VU meter, Emergency ..., Faults ... and
Menu ... screens).
To navigate through the main menu:
1 Navigate in the status screens to Menu....
2 Push the button to go to the main menu. The menu
item number starts blinking.
3 Turn to select another menu item number.
4 Push to confirm the selection.
To jump to a submenu:
1 Navigate to an item with three dots (e.g. Setup...).
2 Push the button to go to the submenu. The submenu
item character starts blinking.
3 Turn to select another menu item number.
4 Push to confirm the selection.
To navigate through a submenu:
1 Turn the button to move the cursor to the submenu
item character.
2 Push the button. The item character and title starts
blinking.
3 Turn to select another submenu item character.
4 Push to confirm the selection.
To change option values:
1 Navigate to the applicable menu item.
2 Turn the button to move the cursor to the option
value you want to change.
3 Push the button to activate the option. The option
starts to blink.
4 Turn the button to select a new option value.
5 Push the button to confirm the new value. The
option value stops blinking.
6 Turn the button to move the cursor to another
settable option (when available) and repeat steps
3 to 5.
en | 93
Advertisement
Table of Contents
