Step 6.
Turn on the GOT.
Step 7.
Check that the battery condition is normal with the utility.
For the details of the battery condition display, refer to the following.
➠
GOT2000 Series User's Manual (Utility)
6.9.3
Installing the battery to GT2310 or GT2308
The following shows the battery installation procedure, taking GT2310 as an example.
Step 1.
Make sure that the GOT power is off.
Step 2.
Install the battery to the GOT rear face.
Open the battery cover as shown below.
Step 3.
To replace the battery, remove the old battery, and then disconnect the connector.
For information on how to remove the battery, refer to the following.
➠
6.10 Removing the Battery
Step 4.
Insert the battery connector to the GOT connector.
Battery cover
Battery
Battery cover
Red cable
Black cable
Connector
6.9 Installing the Battery
6
6 - 43