Mitsubishi Electric GOT2000 Series User Manual page 193

■2. Precautions on installing the panel-mounted USB port extension
1) Run power lines, servo amplifier drive wires, and panel-mounted USB port extensions so that
they do not cross each other.
2) Install the panel-mounted USB port extension away from noise sources such as equipment.
3) Do not twist, bend at a sharp angle or a right angle, and stretch the panel-mounted USB port
extension since the cable may be broken.
4) Install it while considering the following control panel inside dimensions.
• Dimension between the back of the GOT and structures
• Dimension of the protruding cable
5) Insert the USB plug part of the tip of the panel-mounted USB interface (Host) extension securely
to the USB port of the GOT.
Since the USB plug part may be inserted loosely or unplugged by power of vibrations, impacts, or pulling, fix
the cable to the structures inside the panel or cable clamp mounting hole of the GOT main unit by using the
banding band or others.
(Cable clamp used in this example: RSG-130-V0, KITAGAWA INDUSTRIES CO.,LTD.)
6) Use the product after checking that the functions and performances operate correctly.
80 (3.15")
or more
80 (3.15") or more
6.15 Panel-Mounted USB Port Extension
6
6 - 65