Got Status Check Sheet - Mitsubishi Electric GOT2000 Series User Manual

10.1.1

GOT status check sheet

Check the GOT starting from ■1. GOT status.
Mark checkboxes that apply.to the symptom of your GOT.
Proceed according to the corrective actions.
■1. GOT status
(1) Check of failure frequency, such as the GOT does not operate and an error occurs on the screen
Check Symptom
□ Always occurs.
□ Occurs sometimes.
(2) Check of the displayed error code (system alarm)
Check Symptom
□ Can be checked.
□ Cannot be checked.
(3) Check of the POWER LED
Check Symptom
Lit in blue.
□ (GT27, GT25, GT23, and
GT2105-Q)
Lit in orange.
□ (GT27, GT25, GT23, and
GT2105-Q)
Blinking in orange and blue.
□ (GT27, GT25, GT23, and
GT2105-Q)
□ Not lit
Cause
• Frequency:
Example: Once a month
Cause
• Error code (system alarm):
Example: 460 Communication unit error
Cause/status
The power is supplied normally.
Screen saving is being performed.
When the read device of the system
information was set, the device was turned
on and the screen was switched to the
forced screen saving status.
A backlight failure has occurred.
The power is not supplied.
If the power is supplied, the GOT hardware
may be faulty.
Corrective action
Proceed to (2).
Corrective action
Take the corrective action for the error code
(system alarm) or error message.
If the status does not change with the corrective
action, proceed to (3).
Proceed to (3).
Corrective action
Proceed to (4).
Check the setting of the read device.
If no problem is found in the setting, proceed to
(4).
Proceed to ■5. Faulty product investigation.
If the GOT is not restored, proceed to (4).
Check if the power is supplied. If the GOT is not
restored, proceed to .
■5. Faulty product investigation
10.1 GOT Restoration Sheets
10
10 - 3