NEC 424 Installation Manual page 7

• Do not look into the laser diffusion part while the touch module is on. Serious
damage to your eyes could result.
• The following caution pictogram is indicated near the laser diffusion part.
• Keep any optical items (a loupe, a reflecting mirror, etc.) out of the projection
screen area. Visual impairment could result.
• Do not remove any screws besides the specified screws in this installation
manual for mounting /demounting this product.
• Do not disassemble and remodel. Do not subject this product to shock or ex-
cessive forces. It may cause of fire, shock and laser light leakage.
Contact your dealer for the inspection, adjustment and repair.
• Do not place this product in damp place. Avoid dripping or splashing water
near this product. If water has been spilled into this product, contact your
dealer.
• Do not insert any metal or flammable objects. It may cause of fire and shock.
Pay enough attention to children. If something should fall into this product,
disconnect the USB cable connecting with the projector and contact your
dealer.
• The power for this product is supplied from the USB port on the supported
projector via the USB cable supplied with this product.
Wrong connection may cause of fire and shock.
• If the touch module is mounted with the built-in magnets, take appropriate
countermeasure from falling down. If not, the touch module may fall down and
may cause of injury.
Take security measure by an item supports the MicroSaver® security system.
WARNING
CAUTION
ENG-5