1005 - Class Of Service - NEC 28i System Manual

1005 - Class of Service

Description
Use Program 1005 - Class of Service to assign a Class of Service
to an extension. The system has 15 Classes of Service (1-15). To
specify the options in each Class of Service, refer to Programs 0406
and 0419. You make four or eight entries (depending on your soft-
ware version) for Program 1005, one for each Night Service Mode:
DAY = Day Mode
NIT = Night Mode
MID = Midnight Mode
REST = Rest Mode
Conditions
None
Default Setting
No one-digit service codes programmed.
Feature Cross Reference
Do Not Disturb
Message Waiting
Room Status
Room Status Printouts
Room to Room Call Restriction
Toll Restriction (When Checked In)
Wake Up Call
Telephone Programming Instructions
To enter data for Program 1005 (Class of Service):
1. Enter the programming mode.
2. 1005 + HOLD.
STA Port?
3. Enter the number of the extension port you want to program +
HOLD
The 28i has extension ports 1-20 and virtual ports 73-96.
The 124i has extension ports 1-72 and virtual ports 73-96. The
124i Enhanced has extension ports 1-72 and virtual ports 201-
248. The 384i has extension ports 1-256 and virtual extension
ports 257-384. The 704i has extension ports 1-640 and virtual
ports 641-896.
CLS(DAY1):
4. For the extension port selected in the previous step, enter the
Class of Service for the Day Mode + HOLD
CLS(NIT1):
3-20
DAY 2 = Day 2 Mode
NIT 2 = Night 2 Mode
MID 2 = Midnight 2 Mode
REST 2 = Rest 2 Mode