NEC 28i System Manual page 53

Toll Restriction (When Checked In)
Setting Up Toll Restriction (When Checked In) (cont'd)
For your reference . . .
0406, COS Options, Item 112: Hotel Room Toll Restriction Set
Use this option to enable (1) or disable (0) an extension's ability
to set the Toll Restriction Level (When Checked In) for another
extension. In most cases, only the supervisor's station would have
this capability.
0701, Toll Restriction Class
For each Toll Restriction Class assigned to an extension in
Program 1004, enable or disable the different Toll Restriction
Tables set up in Program 0702. This sets up the Toll Restriction
scenarios for room telephones when they are not checked in.
Refer to your Software Manual for additional information on this
program.
0702, Toll Restriction Tables
Set up the various Toll Restriction Tables and options. Once set
up, you assign the tables and options to Toll Restriction Classes
in Program 0701. In addition, you assign extensions to Toll
Restriction Classes in Program 1004. This sets up the Toll
Restriction scenarios for room telephones when they are not
checked in. Refer to your Software Manual for additional infor-
mation on this program.
1004, Toll Restriction Class Assignment
Use this program to assign extensions to Toll Restriction Classes.
In Program 0701, you assign the various options set up in Program
0702 to the classes assigned in Program 1004. This sets up the Toll
Restriction scenarios for room telephones when they are not
checked in. Refer to your Software Manual for additional informa-
tion on this program.
1005, Class of Service
Assign Class of Service to extensions.
1022, Hotel Toll Restriction Level
When a room telephone is checked in, it uses the Toll Restriction
Level assigned in this program. You would generally have differ-
ent entries for Program 1004 and Program 1022. This would allow
you to have more dialing restrictions when a room is checked in
— and more lenient dialing restrictions once a guest checks out.
Station Restriction Codes dialed by the supervisor or sent from
an optional PMS system permanently override this option. Refer
to the PMS Integration feature for more information.
2-45