Slot For The Compactflash Card - Siemens SINAMICS S120 Equipment Manual

Control Units
2.2 Control Unit 320 (CU320)
2.2.3.11

Slot for the CompactFlash Card

Figure 2-5 CompactFlash Card slot
Caution
The CompactFlash Card may only be inserted as shown in the figure (arrow top right).
The CompactFlash Card may only be inserted or removed when the Control Unit is
disconnected from the power supply.
When returning a defective Control Unit, remove the CompactFlash Card and keep it for
insertion in the replacement unit. If you do not do this, the CompactFlash Card and all the
data on it (parameters, firmware, licenses, etc.) may be lost during transportation.
2-14
Equipment Manual Control Units and Additional System Components
Equipment Manual, (GH1), 12/2004 Edition, 6SL3097-2AH00-0BP1