Entering Data On The Keypad Panel; Operation Mode; Setting Digital Frequency - GE AF-300 P11 User Manual

4.3 Entering Data on the Keypad Panel

4.3.1 Operation Mode

The screen for normal inverter operation includes a screen for displaying drive operating status and a screen for graphi-
cally displaying the status in the form of a bar graph. The operator can switch between both screens by using the function
(E45).
1) Operating Status (E45=0)
60.00
STOP
PRG PRG
MENU
F/D LED SHIFT
2) Bar Graph (E45=1)
60.00
Hz
A
%
Fout/Iout/TRQ

4.3.2 Setting Digital Frequency

On the operation mode screen, press
decreased in the smallest possible unit, depending on which key is pressed. The adjustments in data will occur rapidly if
the operator holds down
FUNC
frequency settings press
DATA
Press and to to return to the operation mode. If keypad panel settings are not selected, the present frequency
RESET PRG
setting mode appears on the LCD. When selecting the PID function, the PID command can be set with a process value
(refer to technical documentation for details).
1) Digital (keypad panel) settings (F01=0 or C30=0)
60.00
RUN
FWD
PRG PRG
MENU
F/D LED SHIFT
2) Non-digital setting
60.00
RUN
PRG PRG MENU
F/D LED SHIFT
60.00
RUN
FWD
PRG PRG
MENU
F/D LED SHIFT
Output frequency (maximum frequency at full-scale)
Output current (200% of inverter rating at full-scale)
Torque calculation (200% of motor rating at full-scale)
or to display the set frequency on the LED. Data is increased or
or . To select a digit use
.
60.00
<DIG>SET Hz>
LOCAL
50 - 400
F/D DATA SET
60.00
Frequency setting value
<REMOTE REF> Screen explanation
12+V1 Present frequency setting mode
F/D DATA SET
Operations guide
4-4
Direction of rotation = blank (no command) or FWD/REV
Operating status = STOP (no command) or RUN
and then data can be set directly. To save the
SHIFT
56.89
<DIG>SET Hz>
LOCAL
50 - 400
F/D DATA SET
STORING...
Data subject to change without notice 7/07. © 2007 GE Drives
Frequency setting value
Screen explanation
Present frequency setting mode
Frequency setting range
Operations guide
FUNC
When pressed and writing
DATA