Data Copy - GE AF-300 P11 User Manual

4.3.13 Data Copy

Select 9. Data Copy to display the Data Copy on the Program Menu screen. Read screen. A copy operation is then
performed in the following order: function data is read from the first inverter, the keypad panel is removed and attached to
a second inverter, the data from the first inverter is written to and stored in the second inverter.
The "verify" feature also makes it possible to compare and check differences in the data stored in the keypad panel and
the data stored in the inverter.
Read data
60.00
RUN
FWD
PRG > PRG MENU
F/D > LED SHIFT
PRG
60.00
1.DATA SETTING
2.DATA CHECK
3. OPR MNTR
4. I/O CHECK
5. MAINTENANCE
6. LOAD FCTR
7. ALM INF
8. ALM CAUSE
> 9. DATA COPY
FUNC
DATA
<DATA COPY>
READ
FUNC
DATA
<DATA COPY>
READ
Reading
<DATA COPY>
30 HP-2
Data of drive type read
READ by keypad panel
COMPLETE
Remove keypad pananel
Data subject to change without notice 7/07. © 2007 GE Drives
Attach keypad panel, Turn power ON.
RUN
PRG > PRG MENU
F/D > LED SHIFT
1.DATA SETTING
2.DATA CHECK
3. OPR MNTR
4. I/O CHECK
5. MAINTENANCE
6. LOAD FCTR
7. ALM INF
8. ALM CAUSE
Data copy screen
> 9. DATA COPY
Mode (read mode)
<DATA COPY>
30 HP-2
<DATA COPY>
30 HP-2
Read complete
<DATA COPY>
30 HP-2
Write data
PRG
60.00
FWD
PRG
60.00
FUNC
DATA
Drive type of data
stored by keypad panel
READ
Mode (write mode)
WRITE
FUNC
DATA
<DATA COPY>
30 HP-2
WRITE
COMPLETE
Writing
4-13
WRITE
Write complete