Philips MCP9360i Service Manual page 36

EN 36 11. MCP9360i
9. Indicate that you want to install a set-top box.
10. The Which Tuners Do You Want to Configure? screen will appear. Select AVerMedia Tuner Card Tuner 1 (the upper
Composite and S-Video connectors).
11. Select Enter Channel and enter a channel number that should be available. Check if you can see the expected TV signal in the
small video window on the right.
12. Select Composite Video . Check for the expected Composite Video signal in the video window.
13. Disconnect the Composite Video cables from the MCP9360i. Connect the S-Video source to the upper connector on the back
panel.
14. Select S-Video . Check for the expected S-Video signal in the video window, if necessary click Scan again to refresh the display.
15. Move the S-Video cable to the lower connector on the MCP9360i back panel.
Hardware Tests