Philips MCP9350i Service Manual page 13

10. Check the power values. (BIOS menu select: Advanced > Hardware Monitoring ). See table below.
Power
V 12.0
V 5.0
V 3.3
V 1.5
V ccp
11. Exit the BIOS setup screen without saving changes. (BIOS menu select: Exit > Exit discarding changes ).
The MCP9350i will now continue to start-up. Perform the start-up sequence check, see paragraph 7.3.
7.2.2. Fail Procedure
Perform Troubleshooting procedure. See paragraph 8.
Installation and Initial Checks
Center value (allow for a ± 5% variation)
+12.0 V (± 0.6 V)
+5.0 V (± 0.25 V)
+ 3.3 V (± 0.165 V)
+1.5 V (± 0.075 V)
+ 1.28 V (± 0.064 V)
MCP9350i 7. EN 13