Philips MCP9350i Service Manual page 44

EN 44 12.
12.7. TV Tuner Card & TV Daughterboard
12.7.1. TV Tuner Card Removal
1. Remove the top cover. See paragraph 12.1.1.
2. Remove the riser card subassembly. See paragraph 12.5.1.
3. Remove the 4 mounting screws (1) from the riser card subassembly backplate. See Figure 12.7-1.
4. Remove the 2 mounting screws (2) from the PCI riser card. See Figure 12.7-2.
5. Remove the 2 mounting screws (3) from the TV tuner card. See Figure 12.7-3.
6. Remove together the TV tuner card and the PCI riser card from the riser bracket.
7.
Pull the TV tuner card free from the PCI riser card connector.
1
3
12.7.2. TV Tuner Card Re-Assembly
To re-assemble the TV tuner card, do all processes described in paragraph 12.7.1 in reverse order.
Note: Make sure that the TV tuner card is inserted into the correct connector on the PCI riser card.
Note: The torque setting required for the TV tuner card mounting screws (3) is 6kg-cm
The torque setting required for the PCI riser card mounting screws (2) is 6kg-cm
The torque setting required for the riser card backplate mounting screws (1) is 8kg-cm
MCP9350i Hardware Repair
1
1
1
Figure 12.7-1
3
Figure 12.7-3
2
2
Figure 12.7-2