Exit Unit - Toshiba e-STUDIO2020C Service Handbook

5.6.14

Exit unit

N2
Items to check
N1 Upper exit roller
N2 Lower exit roller
* N2: Lower exit roller
Wipe off any old grease, and then apply 0.5 to 1 rice-sized grains of white grease (Molykote HP-
300) onto the inside of the roller and both end faces of the shaft hole.
e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C
PREVENTIVE MAINTENANCE (PM)
N1
Fig. 5-31
Lubric
ation/
Cleaning
Coatin
(x 1,000 sheets)
g
A
W2
© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved
5 - 36
Replacement
(x 1,000 drive
counts)
Operati Parts
on list
check <P-I>
46-21
46-30