Table of Contents
Advertisement
Notes:
•
"Update Failed." is displayed at the bottom of the LCD screen when the updating is not
completed properly. "Failed" appears next to the failed item on the status display. Even
though an update fails, do not turn the power OFF until other updates are finished. If "Update
Failed" appears at the bottom of the screen, turn OFF the power and then check the following
items. After confirming and clearing the problems, restart updating from the beginning.
-
Do the USB media meet the conditions to be used for updating?
-
Is the data file written properly on the USB media?
-
Are the USB media installed properly?
-
Do the USB media and equipment operate properly?
•
When an error occurred and the update failed, "Update Failed" or "Failed" appears on the
screen and an error code appears next to the message. The content of each error code is
shown below.
Error number
O01
FROM writing failed
O02
FROM verification error
O03
File operation error
O04
SRAM flag set error
O05
Electronic key data backup error
O06
Device error
Error number
H01
File creation error
H02
File decompression error
H03
Partition mount error
H00
Other errors
Error number
Time out
M01
(When the download is requested)
Time out
M02
(When the download is written)
Time out
M03
(When the download is finished)
Reception failed
M04
(When the download is requested)
Deletion error
M05
(When the download is written)
Writing error
M06
(When the download is written)
Checksum error
M07
(When the download is finished)
Reception status code abnormality
M08
(When the download is requested)
Reception status code abnormality
M09
(When the download is written)
Reception status code abnormality
M10
(When the download is finished)
e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C
FIRMWARE UPDATING
OS update Error
Error content
HDD update Error
Error content
Engine update Error
Error message
© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved
8 - 10
Error content
Communication timeout
(When the download is requested)
Communication timeout
(When the download is written)
Communication timeout
(When the download is finished)
Downloading request was denied.
(When the download is requested)
Deletion error
(When the download is written)
Writing error
(When the download is written)
Checksum error
(When the download is finished)
Reception status code abnormality
(When the download is requested)
Reception status code abnormality
(When the download is written)
Reception status code abnormality
(When the download is finished)
Advertisement
Table of Contents
