Hitachi HT-4139-28 Troubleshooting Manual page 24

Table 2.2 Error Code (Host)
Code Detail Cause
33G00101 - Length check error has occurred. (Long)
33G00102 - Length check error has occurred. (Short)
33G00111 - Mixed length check error has occurred.
(Long)
33G00112 - Mixed length check error has occurred.
(Short)
33G00201 - Width check error has occurred. (Long)
33G00202 - Width check error has occurred. (Short)
33G00211 - Mixed width check error has occurred.
(Long)
33G00212 - Mixed width check error has occurred.
(Short)
33G00401 - Skew error has occurred. (Large left skew
angle)
33G00402 - Skew error has occurred. (Large right
skew angle)
33G00901 - A four-point-coordinates detection error
has occurred. (Four-point rectangular
detection)
33G00902 Four-point rectangular detection(color))
33G00B01 - A four-point-coordinates recognition
warning error has occurred. (Soiled at the
reference side)
33G00B02 - A four-point-coordinates recognition
warning error has occurred. (Uncertain at
the top or bottom)
33G00B03 - A four-point-coordinates recognition
warning error has occurred. (Uncertain at
the left end)
33G00B04 - A four-point-coordinates recognition
warning error has occurred. (Uncertain at
the right end)
(2/29)
Troubleshooting
Recovery
Check sheet.
Or confirm sheet
Refer to Appendix of this
manual: A-4 Notes for sheet
check.
If not recovered, get dump
information (refer to 1.4) and
contact Hitachi.
Check sheet.
Refer to Appendix of this
manual: A-2 Notes on 4-point
coordinates recognition
errors.
If not recovered, get dump
information (refer to 1.4) and
contact Hitachi.
2-13