N2N Vpn Client; Dhcp Server; Dhcp Service - D-Link DVX-2002F User Manual

5.3.5 N2N VPN Client

N2N is an open source Layer 2 over Layer 3 VPN application which utilizes a peer-to-peer
architecture for network membership and routing.
On DVX IPPBX system we support N2N VPN client, to configure the N2N VPN client, please
navigate to web menu
configure the client info.
Enable: Tick this checkbox to enable N2N VPN client.

Server Address: N2N server(supernode) IP address.

Port: N2N service port number. This is 82 by default.

Local IP: VPN local IP.

Subnet Mask: Netmask of the VPN network.

Local Port: N2N local service port.

Username/Password:Used for the N2N server to authorize the connection.


5.4 DHCP Server

DHCP(Dynamic Host Configuration Protocol)is a standardized network protocol used on Internet
Protocol (IP) networks for dynamically distributing network configuration parameters, such as IP
addresses for interfaces and services.
With DHCP, computers/IP phones request IP addresses and networking parameters automatically
from DVX IPPBX WAN/LAN port which saves administrators a lot of time when compared with
having to configure these settings manually.

5.4.1 DHCP Service

Network Settings->DHCP
Navigate to web menu
Network Settings->VPN
102 / 130
Client. Check the radio button of N2N VPN and
Server.
DVX IPPBX