Dial Plans - D-Link DVX-2002F User Manual

Time Rule:Set a time condition when this dial rule can be used.

Available Trunks:All existing trunks in the IPPBX system.

Selected Trunks:Trunk/Trunks that can be used by this dial rule.

Custom Pattern:Dial patterns act like a filter for matching numbers dialed with trunks. The

various patterns you can enter are similar to Asterisk's definition of them:
X — Refers to any digit between 0 and 9
N — Refers to any digit between 2 and 9
Z — Any digit that is not zero. (E.g. 1 to 9)
. — Wildcard. Match any number of anything. Must match *something*.
Delete ____ digits prefix from the front and auto-add ________ digit before

blank allows you to strip some digit/digits before dialing out, here if required, you need to
complete the number of digits to delete. The second blank is to prepend some digit/digits
before dialing out, here you need to fill in the exact number of digits to be added in front of
the dialed number.For example a user dialing 912345678 using the dial rule exampleabove,
the prefix 9 at the first digit will be removed, and 00 will be added, so eventually the number
called will actually be 0012345678.

3.2.2 Dial Plans

Basic->Outbound
Navigate to web menu
A default dial plan already exists in the IPPBX system. For most installationsyou just have to click
"Edit" button on the default dial plan "DialPlan1" and tick on all dial rules to enable them,now
extension users will be able to call any destinations using the trunk lines of the IPPBX system.
Routes->DialPlans.
35 / 130
DVX IPPBX
dialing:The first