D-Link DVX-2002F User Manual page 23

On this page, tick "Enable" to enable PnP feature.
Interface: Select WAN or LAN depending on which interface you have connected the IPPBX

to your local LAN.
Custom URL:Custom URL tells the IP phones where to obtain the configuration files for auto

provisioning.You should read your IP phone user manual to determine which kind of files it
requires for auto provisioning. Then you create/upload these files to a FTP/TFTP/HTTP server
for the phones to download. The URL can be IP address or domain name with subdirectory.
For example:http://192.168.1.2/phones/${MAC}.conf. With
don't have to add phones from the
Multicasting Address:IP phones which supportPnP can use multicast discovery of SIP

Registrar. Multicast registrations are addressed to the well-known "all SIP servers" multicast
address "sip.mcast.net" (224.0.1.75 for IPv4).
Port: SIP signaling port, default is 5060.

Notice:
Phone provisioning only works for IP phones that are in the same LAN where the DVX IPPBX is deployed.
After enabling PnP feature, click on
configuration files for the phones to be added to the IPPBX system.
Manufacturer: Manufacturer of the IP phone, currently,DVX supports phone provisioning

phones from the following manufacturers: D-Link.
Model:You must specify the exact model number of the phone, even if the phone is from

the same manufacturer. This is because different models require different configuration
files.
MAC:DVX IPPBX uses the MAC address of the phone to identify it on the local LAN as part of

the provisioning process and it essential that you enter the correct MAC address for your IP
Phone
Extension: The extension number selected here will be auto configured to the phone with

the MAC address given above.
Label:Specify the user name of the phone.

"Phone Settings" tab.
"Phone Settings" tab and click
22 / 130
DVX IPPBX
"Custom URL" configured, you
"New Phones" to generate the