Displaying A Sheet In The Pen Software; Acquiring An Image From A Multifunction Machine - Sharp PN-L401C Operation Manual

Displaying a sheet in the Pen Software

You can display the contents of a sheet on the Pen Software whiteboard.
If there is handwriting, the handwriting also appears.
1. Touch the sheet you want to show in the Pen Software.
2. Touch the Sheet Menu (
3. Touch "Send to Pen Software" (
n In the Pen Software
"Data has been received" dialog box will appear.
4. Touch the dialog box.
The contents of the sheet appear on the whiteboard of the Pen Software.

Acquiring an image from a multifunction machine

If a SHARP multifunction machine is connected to the same network as the computer on which this software is installed, an
image scanned on the multifunction machine can be acquired to the temporary drawer.
TIPS
• S upports the Network Scanner Tool 3.3 or higher which is included in "Sharpdesk".
• F or details, contact your dealer or nearest authorized service representative for the multifunction machine.
• F or the procedures for using the multifunction machine, see the manual for the multifunction machine.
n Using Network Scanner Tool to acquire an image
TIPS
• T he first time you use Network Scanner Tool in the full version, install Network Scanner Tool on the computer on which this
software has been installed, and configure the Network Scanner Tool settings. (See page 15.)
• T o acquire an image from a multifunction machine, the Network Scanner Tool must be running on your computer.
In the multifunction machine:
1. Place the document in the multifunction machine.
2. Select a destination stored in the Network Scanner Tool.
3. Select the scan send format.
4. Execute scanning in the color mode.
Operation in this software:
The scanned image is added to the temporary drawer, and the temporary drawer blinks.
5. Drag and drop the image file in the temporary drawer to the work area.
The image is displayed on the sheet.
14
E
) on the Sheet Bar.
).