Preparations; Assigning A Folder To A Drawer - Sharp PN-L401C Operation Manual

Touch panel settings
Create a folder for the meeting on your computer, and save the files to be used during the meeting in the folder.
Assign the folder to be used during the meeting to a drawer of this software.
Caution
• Files in a sub-folder of a folder cannot be displayed. Be sure to save all files to the same folder.

Assigning a folder to a drawer

Assign the folder to be displayed in a drawer.
Touch the drawer to show a list of the files in the folder.
TIPS
• Only files types that can be displayed in this software will appear in a drawer.
• 3 drawers are preset during installation.
The folders below are pre-set to the following drawers.
Drawer 1 : C:\Users\<User name>\Documents\TouchSoftware\drawer\drawer1
Drawer 2 : C:\Users\<User name>\Documents\TouchSoftware\drawer\drawer2
Drawer 3 : C:\Users\<User name>\Documents\TouchSoftware\drawer\drawer3
• Up to 20 drawers can be added. (Including the layout drawer and temporary drawer.)
• A maximum of 100 files can be displayed in a drawer.
• Up to 200 pages can be shown on a sheet.
• If a drawer cannot be displayed because a registered folder is missing or otherwise, the drawer will be automatically hidden.
When the missing folder is returned or the drawer otherwise becomes displayable, it will automatically appear.
n Adding a drawer
1. Touch .
2. Enter a name.
3. Touch "Browse" and select the folder you want to assign to the drawer.
4. Touch "OK".
The drawer is created.
n Adding a USB flash drive drawer
When a USB flash drive is inserted into the computer connected to the monitor, a drawer automatically appears.
The added drawer appears in a color that is different from the other drawers.
TIPS
• Up to three USB flash drives can be added. Each drawer is added on the far right.
• A USB flash drive drawer can be added even when the maximum of 20 drawers are displayed.
• You can change a setting so that a USB flash drive drawer is not automatically added. (See page 9.)

Preparations

7
E