Record - Cisco Nexus 7000 Series Reference Manual

record

record
To specify a flow record to be used by a NetFlow monitor, use the record command. To remove the
record, use the no form of this command.
Syntax Description name
Defaults
None
Command Modes NetFlow monitor configuration (config-flow-record)
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines Make sure that you are in the correct virtual device context (VDC). To change the VDC, use the switchto
vdc command.
This command does not require a license.
Examples
This example shows how to specify a NetFlow record to use for a NetFlow monitor:
switch(config)# switch(config)# flow monitor newflow1
switch(config-flow-monitor)# description recordflow
switch(config-flow-monitor)# record netflow ipv6 original-input
switch(config-flow-monitor)#
This example shows how to remove a record from a NetFlow monitor:
switch(config-flow-record)# no record netflow ipv4 original-input
switch(config-flow-record)#
Related Commands Command
show flow sw-monitor
Cisco Nexus 7000 Series NX-OS System Management Command Reference
348
record name
no record [name]
Name of an existing NetFlow record.
Modification
This command was introduced.
Description
Displays information about NetFlow monitors.
R Commands
OL-25806-03