Cisco Nexus 7000 Series Reference Manual page 544

show interface ethernet counter detailed
show interface ethernet counter detailed
To display the only nonzero counters, use the show interface ethernet counter detailed command.
Syntax Description
slot/chassis
Defaults None
Command Modes Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
6.1(2)
Usage Guidelines This command does not require a license.
Examples This example shows how to display the only nonzero counters:
switch# show interface ethernet 10/25 counters detailed
Ethernet10/25
Rx Packets:
Rx Unicast Packets:
Rx Multicast Packets:
Rx Bytes:
Rx Packets from 128 to 255 bytes:
Rx Packets from 256 to 511 bytes:
Rx Packets from 1024 to 1518 bytes:
Tx Packets:
Tx Unicast Packets:
Tx Multicast Packets:
Tx Bytes:
Tx Packets from 65 to 127 bytes:
Tx Packets from 128 to 255 bytes:
Tx Packets from 256 to 511 bytes:
Tx Packets from 1024 to 1518 bytes:
Non Fcoe in packets:
Non Fcoe in octets:
Non Fcoe out packets:
Non Fcoe out octets:
Tx LPI usecs
Cisco Nexus 7000 Series NX-OS System Management Command Reference
516
show interface ethernet slot/chassis counter detailed
Slot or chassis number.The range is from 1 to 253.
Modification
This command was introduced.
3635
9788
3631
1062103
1211
2420
4
39883
9788
39879
3731578
36247
1211
2421
4
13419
2392727
39883
3731578
74304694529
Show Commands
OL-25806-03